does reflector 2 work with 3g unrestrictor

In the advanced settings of the transceiver, you can enable the strobe mode for the slave flash. However, the transmitter can be put into manual mode in the settings, and the main functions will work normally on other systems, while only the central contact of the transmitter will be active.Īlso, the combination of a transceiver-receiver can control studio light sources (not tested), carry out remote start of the camera (works). Only you need to choose a receiver for your system, otherwise TTL will not work.

The flash with this receiver is fully included in the work, it can work in TTL, FP / HSS modes, its power can be controlled from the transceiver X-1T. The receiver looks very similar to the transmitter, also powered by 2 AA elements. Nikon S), then Godox has released a receiver-receiver for you X-1R. If you already have a third-party TTL flash (e.g. The closest analogue is the TTL synchronizer from Yongnuo YN-622-TX second generation, you can also set the power on the transmitter itself, there is a laser autofocus backlight at about the same cost, compatibility with manual flash units of the 560th series is claimed. The camera is fixed in the shoe with a clamping wheel - we could have made a convenient latch, like S or Yongnuo YN660.Īttention: Autofocus backlight is initially turned off, it is turned on in the advanced menu (see instructions) Controls: buttons for selecting a channel, group, operating mode (manual / TTL / off), a control wheel, on the right side of the transmitter power-on and autofocus lamp backlight levers, on the left Micro-USB connectors for updating the firmware, PC-port for synchronization. The transceiver is made of black matte plastic, made of high quality. it is stated that the transceiver can operate according to the protocol Nikon CLSHowever, how this is implemented, I did not understand.powered by 2 AA cells - it’s convenient that you don’t need to have spare batteries of another format with you.

supports FP / HSS with shutter speed up to 1/8000 s (more about this below).

compatible flash units can be controlled remotely - a very convenient function if the flash units are far away or in an inaccessible place (for example, in an umbrella softbox).

can control 5 groups of flashes on 32 channels.

Dimensions, weight 72 x 75 x 52 mm, weight 100 g (data from the manual).

The version for Nikon is called X-1N, and consider it. Godox released a transceiver (transmitter) in 2015 Godox x-1t for Nikon, Canon and Sony systems, transceivers have recently been released for Fuji and Olimpus, so Godox has covered almost the entire consumer market (I did not find information regarding the release of this transmitter for Pentax and Samsung).

Does reflector 2 work with 3g unrestrictor